Planar PT1814NUV Manuale Utente
User’s Manual
4
Do not force the Monitor past its maximum extension in either direction. You could
damage the Monitor and the Monitor stand.
damage the Monitor and the Monitor stand.
Positioning
Take a moment to prepare a suitable place to set up your workstation. You need a stable flat dust-free surface with
good ventilation. Even though the LCD Monitor has been designed using components that don’t use much power, they
still generate quite a bit of heat. Set up your LCD Monitor so that the screen doesn’t face a window where sunlight
often comes in. The glare caused by reflected sunlight makes the screen difficult to see.
good ventilation. Even though the LCD Monitor has been designed using components that don’t use much power, they
still generate quite a bit of heat. Set up your LCD Monitor so that the screen doesn’t face a window where sunlight
often comes in. The glare caused by reflected sunlight makes the screen difficult to see.
• When positioning the equipment, make sure that the main ports and sockets are
easily accessible.
• Do not place your LCD Monitor close to a heat source.
• Do not place the LCD Monitor in direct sunlight or near a window. Moisture and
direct sunlight exposure can be seriously damaging.
Connecting AC Power
Please refer to the following instructions for connecting AC power to the LCD Monitor.
1. Plug the female end of the power cable into the AC power connector. Plug the male end of the power cord
into a wall socket. The plug on the power cable will vary according to the electrical standard in your area.
Connecting Video
1. Before connecting your monitor to the PC, please power-off both devices.
2.
Connect one end of the VGA signal cable to the PC’s 15-pin VGA port and the other end to the monitor 15-
pin VGA port. You may also connect the DVI (digital video interface) signal cable to the 24-pin DVT port if
your PC is equipped with DVI output.
your PC is equipped with DVI output.