NEC LCD1855NX Manuale Utente

Have you installed the display driver?

No image appears

Troubleshooting

Check the following before calling for service.

• Check and see if the power cord is connected

properly to the power outlet.

• Press the Power button.

• Adjust the brightness and the contrast.

• If the display is in power saving mode, try moving the

mouse or pressing any key on the keyboard to bring up
the screen.

• This message appears when the signal from the PC

(video card) is out of horizontal or vertical frequency
range of the display.
See the 'Specifications' section of this manual and
configure your display again.

• This message appears when the signal cable between your

PC and your display is not connected. Check the signal
cable and try again.

• Is the power cord of the

display connected?

• Is the power indicator light

on?

• Is the power on and the

power indicator green?

• Is the power indicator

amber?

• Do you see an "INPUT

SIGNAL OUT OF RANGE"
message on the screen?

• Do you see a "NO

SIGNAL" message on the
screen?

• Be sure to install the display driver. You can download the

driver from our web site: http://www.necmitsubishi.com

• Have you installed the dis-

play driver?

LCD1855NX061102.qxd 6/11/02 10:43 AM Page 10