NEC LCD1980FXi Dépliant

NOTE: Technical specifications are subject to
change without notice.

All of these control capabilities are made possible using the advanced remote diagnostics

and remote control capabilities of the Display Data Channel/Command Interface (DDC/CI).

This allows control commands to be sent directly to the monitor by the local system or

remotely over an existing network (LAN) by a system administrator. In order to take full

advantage of these benefits, users must use a DDC/CI-compatible graphics card and be

running Windows 2000/XP.

Also controlled through the Advanced OSM is TileMatrix, which allows you to build video

walls of various configurations. With the use of a simple video amplifier and a standard

video card, this feature saves you time and money compared to other connection solutions.

With the ability to utilize up to 25 monitors (5 x 5 configuration) that display a shared

image, you can build an impressive video wall for various applications, including advertising

and tradeshows. TileComp works in tandem with TileMatrix to compensate for the width of

tiled bezels and optimally display still images.

Another user-controlled feature offered by the Advanced OSM is AutoBright, which adjusts

the brightness level based on the image content on the screen. This function delivers

optimal readability and reduced user eyestrain, as well as conserves energy, contributing

to a lower total cost of ownership.

Wide compatibility for today and tomorrow. Ambix+™ technology provides the widest

range of computer video compatibilities between analog and digital systems by allowing the

same monitor to work seamlessly in either environment. The DVI-I connector provides

digital or analog input, the DVI-D connector provides digital-only input, and a third input is

provided with a traditional 15-pin VGA connector, which allows for legacy analog-only

connection. This tripleinterface architecture provides a number of single and dual-input

configurations.

Hassle-free display setup. With Advanced No Touch Auto Adjust, the MultiSync LCD1980FXi

not only provides for an optimal image upon initial power-on but can also detect closed

signal changes even if it runs under the same resolution and refresh rate, as is the case

with external signal switch boxes. This results in a more stable image after switching. This

model also features auto DVI cable detection, which, upon power-up of your computer

system, allows it to identify which signal cable (analog or digital) is attached to the

monitor’s DVI-I connector. This technology eliminates many manual setup steps and

assures that your system and monitor configuration are achieving optimal performance.

Intelligent power management ensures a smart investment. Using approximately 50%

less power and emitting less heat than comparable CRT monitors, the MultiSync LCD1980FXi

allows you to conserve energy and lower your total cost of ownership. Many technologies

contribute to these savings, including the automatic power-off timer, which can be set

from 1-24 hours via the on-screen display. If users forget to turn off their monitors, this

function will turn them off automatically after a user-determined period of time, thereby

reducing electrical power costs. The high-efficiency backlight, which provides the longest

lifetimes of any NEC LCD monitor, reduces not only the power consumption but also the

heat generation at the front of the screen.

OSM is a registered trademark, and Advanced No Touch Auto Adjust,
AmbiBright, Ambix+, AutoBright, GammaComp, NaViSet, Rapid Motion,
Rapid Response, TileMatrix, TileComp, XtraView+, are trademarks of
NEC Display Solutions of America, Inc. ENERGY STAR is a U.S. registered
trademark. All other brand or product names are trademarks or
registered trademarks of their respective holders.
©2005 NEC Display Solutions of America. 3/05 ver.1.

NEC Display Solutions of America, Inc.
500 Park Boulevard, Suite 1100
Itasca, IL 60143
888-NEC-MITS
www.necmitsubishi.com

Model

Display
Viewable

Image

Size

Pixel

Pitch

Pixels Per Inch

Brightness

(typical)

Contrast

Ratio

(typical)

Viewing

Angle

(typical)

Response Time (typical)

Display

Colors

Synchronization Range
Horizontal
Vertical

Input Signal
Video
Sync

Input

Resolutions Supported

Native Resolution

Additional Features

Touch/Protective Glass-Capable

Voltage Rating

Power Consumption (typical)
On
Power

Savings

Mode

Dimensions (W x H x D)
Net

(with

stand)

Net

(without

stand)

Weight
Net

(with

stand)

Net

(without

stand)

VESA Hole Configuration Specs.

Environmental Considerations
Operating

Temp.

Operating

Humidity

Operating

Altitude:

Storage

Temp.

Storage

Humidity

Storage

Altitude:

Limited Warranty

Technical Support

NEC MultiSync LCD1980FXi

19"/48.2 cm
0.294mm
86 @ native resolution
270 cd/m

600:1
178° Vert., 178° Horiz. (89U/89D/89L/89R)
Rapid Response (18ms)
16.77 million

31.5 - 81.1 kHz
50 - 85 Hz

Analog 0.7 Vp-p/75 Ohms
Separate Sync: TTL Level (positive/negative)
Composite Sync: TTL Level
(positive/negative)
Composite Sync on Green (0.3 Vp-p negative
0.7 Vp-p positive)

DVI-I, DVI-D and VGA 15 pin D-sub

Analog/Digital:
720 x 400 @ 70 - 85 Hz
640 x 480 @ 60 - 85 Hz
800 x 600 @ 56 - 85 Hz
832 x 624 @ 75 Hz
1024 x 768 @ 60 - 85 Hz
1152 x 864 @ 70 - 85 Hz
1152 x 870 @ 75 Hz
1280 x 960 @ 60 Hz
1280 x 1024 @ 60 - 75 Hz

1280 x 1024 @ 60 Hz

Ultra-thin-frame (bezel), GammaComp,
TileMatrix, TileComp, XtraView+ wide-angle
viewing technology, Ambix+ technology,
Advanced No Touch Auto Adjust, AutoBright,
CableComp, power-off timer, black level
adjustment, AmbiBright, digital smoothing,
digital controls, OmniColor 6-axis color
control sRGB, Plug and Play (VESA DDC2B &
2Bi), VESA DPMS power management, ISO
13406-2 Class II, vacation switch, optional
MultiSync SoundBar 80, height-adjustable
stand, Rapid Motion

Designed for integration

Universal 100 (110-240V) 50-60 Hz internal

48W
<2W

402.3 x 364.8 x 200mm / 15.8 x 14.4 x 7.9 in.
402.3 x 330.3 x 77.5mm / 15.8 x 13 x 3.1 in.

21.4 lbs/9.7 kg
13.9 lbs/6.3 kg

100mm x 100mm

5-35°C/41-95°F
30-80%
3048 m/10,000 ft
-10-60°C/14-140°F
10-85%
12,192 m/40,000 ft

3 years parts and labor, including backlight

24 hours/7 days