NEC LCD1700NX Manuale Utente
MultiSync LCD1700NX
INSTALLATION
To install the monitor to your host system, please follow the steps as given below:
Steps
1. Open the connector cover first.
2. And then open the cable cover.
2. And then open the cable cover.
3. Connect Video Cable
a. Make sure both the monitor and computer are powered-OFF.
b. Digital: Connect the DVI signal cable to the connector of the computer first, then
b. Digital: Connect the DVI signal cable to the connector of the computer first, then
to the monitor.
Analog: Connect the 15-pin mini D-SUB signal cable to the connector of the
computer first, then to the monitor.
4. Connect power cord
Connect the power cord to the monitor, then to a properly grounded AC outlet.
5. Assemble the cable cover.
6. Cover the connector cover.
7. Power-ON Monitor and Computer
Power-ON the monitor first, then power-ON the computer.
This sequence is very important.
This sequence is very important.
8. If the monitor still does not function properly, please refer to the trobleshooting section
to diagnose the problem.
9
PULL
D-SUB Cable
DVI-D Cable(not included)
Cable Cover
(This semi-circle opening is the Cables outlet)
(This semi-circle opening is the Cables outlet)
Connector Cover
LCD1700NX(English).PM6
02.2.12, 3:50 PM
11