NEC LCD2170NX Manuale Utente

8

To prepare the monitor for alternate mounting method:
.  Place hands on each side of the monitor and lift up to

the highest position. Remove the cable cover (Figure

M.).

NOTE: If you have difficulty removing the cable cover,

push the the cover up (towards the top of the monitor)

in  order  to  unhook  the  cover  from  the  stand,  then

remove, as shown in (Figure). Handle with care when

removing cable cover.

2.  Disconnect all cables.
3.  Place monitor face down on a non-abrasive surface (Figure M.2).

NOTE:  Handle with care when the monitor is facing down to avoid

damaging the front buttons.

4.  Remove  the  2  screws  connecting  the  stand  to  the  monitor

(Figure M.2).

5.  Lift up the stand to unlatch the upper hooks and remove the stand

(Figure M.3).

6.  Remove the 2 screws on the top of the monitor (Figure M.4). The

monitor is now ready for mounting in an alternate manner.

7.  Connect the cables to the back of the monitor.
8.  Reverse this process to reattach stand.

NOTE:  Use  only  VESA-compatible  alternative  mounting  method.

Handle with care when removing stand.

Figure M.

Figure M.2

Figure M.3

Figure M.4

Figure