NEC DPSB70 Manuale Utente

 6

Color presets selects the desired color setting.  The bar is replaced by the color
setting choice.  Each color setting is adjusted at the factory to the stated Kelvin. If
a setting is adjusted, the name of the setting will change from Kelvin to Custom
except sRGB mode.
Red, Green, Blue:

 AccuColor Control System decreases or increases the

monitor's red, green or blue color guns depending upon which is selected.  The
change in color will appear on screen and the direction (decrease or increase)
will be shown by the bars.
sRGB mode:

 sRGB mode provides the suitable color managed picture image.  You

can not change Red, Green and Blue colors, brightness and contrast individually.
Color Temperature Adjustment:

 Adjusts the color temperature of the screen image.

Geometry Controls Menu
The Geometry controls allow you to adjust the curvature or angle of the sides of
your display.
Sides In/Out (pincushion): 

Decreases or increases the curvature of the sides either

inward or outward.
Sides Left/Right (pincushion balance):

 Decreases or increases the curvature of

the sides either to the left or right.
Sides Tilt (parallelogram): 

Decreases or increases the tilt of the sides either to the

left or right.
Sides Align (trapezoidal):

 Decreases or increases the bottom of the screen to be

the same as the top.
Rotate (raster rotation):

 Rotates the entire display clockwise or counterclockwise.

Moiré is a wavy pattern which can sometimes appear on the screen.

The pattern is repetitive and superimposed as rippled images. When running certain
applications, the wavy pattern is more evident than in others. To reduce moiré, adjust
the level by using –/+ CONTROL buttons.

 OSM controls menus are available in 6 languages.

 You can choose where you would like the OSM controls menu to

appear on your screen. Selecting OSM Position allows you to manually adjust the
OSM controls menu position from among Center, Top left, Top right, Bottom left
and Bottom right.
OSM Turn Off:

 The OSM controls menu will stay on as long as it is in use.  In the

OSM Turn Off sub-menu, you can select how long the monitor waits after the last
touch of a button for the OSM controls menu to disappear. The preset choices
are 5 thru 120 seconds.

DPSB70Manual.p65

5/7/02, 11:31 AM

6