NEC 42MP1 Manuale Utente

21

Adjusting the color to the desired quality
Use this procedure to adjust the white balance for bright pic-
tures and dark pictures to achieve the desired color quality.

Example: Adjusting the "WHITE BALANCE"

1. Use the 

▲ and ▼ buttons to select “PICTURE”, then

press the “PROCEED” button.
The “PICTURE” screen appears.

2. Use the 

▲ and ▼ buttons to select “COLOR TEMP.”.

3. Use the 

 and 

 buttons to select "PRO".

The mode switches as follows when the 

  and 

buttons are pressed:

→ 1 ↔ 2 ↔ 3 ↔ PRO ←

If neither the 

 or 

 button is pressed within 5 seconds,

the current selection is set and the previous screen reppears.

4. Press the “PROCEED” button.

The "WHITE BALANCE" screen appears.

5. Use the 

▲ and ▼ buttons to select "RED-GAIN".

6. Adjusts the white balance using the 

 and 

 buttons.

 Adjusting the white balance
RGB-GAIN .... White balance adjustment for signal

level

RGB-BIAS ..... White balance adjustment for black

level

 Restoring the factory default settings
Restoring the factory default settings
Select “RESET” under the function menu. Note that this
also restores other settings to the factory defaults.

* If neither the 

 or 

 button is pressed within 5 sec-

onds, the current setting is set and the previous screen
reappears.

7. Press the “PROCEED” button.

The white balance has now been adjusted.

8. Once the adjustment is completed...

Press the “EXIT” button to return to the main menu.
To delete the main menu, press the “EXIT” button once
more.