MAXTECH XT4871 Manuale Utente
3
Horizontal and Vertical Synchronization signals. This mode reduces the
monitor’s power consumption to 5W. When the synchronization signals
are re-enabled the monitor returns to normal operation.
monitor’s power consumption to 5W. When the synchronization signals
are re-enabled the monitor returns to normal operation.
Section 2 - Installation
2.1
Attaching the Base
• Carefully place the monitor on its
side or top.
• Insert the hooks on the swivel base
into the slots in the bottom of the
monitor. Push down and forward
on the base until it snaps into place.
monitor. Push down and forward
on the base until it snaps into place.
• Place the display upright in an ap-
propriate location.
2.2
Connecting the Cable
• Make sure that power to the monitor and the computer is off.
• Connect the cable from the back of the monitor to the video connector
• Connect the cable from the back of the monitor to the video connector
on the computer.
• Attach the power cord to the monitor and plug it into an AC outlet.
Expansion boards
COM1
COM2
LPT1
VIDEO
Figure 2-1 Monitor Connections
Figure 2-1 Connecting the
Base