Samsung 710NT Manuale Utente
disappears.
Please change to the recommended
mode during this one-minute period.
Please change to the recommended
mode during this one-minute period.
(The message is displayed again if
the system is rebooted.)
There is no image on the
screen.
Is the power indicator on
the monitor blinking at 1
screen.
Is the power indicator on
the monitor blinking at 1
second intervals?
The monitor is in PowerSaver mode.
press a key on the keyboard to
activate the monitor and restore the
press a key on the keyboard to
activate the monitor and restore the
image on the screen.
If there is still no image, press the '
If there is still no image, press the '
/ SOURCE' button.
Then press any key on the keyboard
again to activate the monitor and
restore the image on the screen.
restore the image on the screen.
I cannot see the On
Screen Display.
Screen Display.
Have you locked the On
Screen Display (OSD)
Menu to prevent changes?
Screen Display (OSD)
Menu to prevent changes?
Unlock the OSD by pressing the
MENU button for at least 5 seconds.
MENU button for at least 5 seconds.
The screen shows
strange colors or just
black and white.
strange colors or just
black and white.
Is the screen displaying
only one color as if looking
at the screen through a
only one color as if looking
at the screen through a
cellophane paper?
Check the signal cable
connection.Make sure the video
card is fully inserted in it's slot.
connection.Make sure the video
card is fully inserted in it's slot.
Have the screen colors
become strange after
running a program or due
to a crash between
applications?
running a program or due
to a crash between
applications?
Reboot the computer.
Has the video card been
set properly?
set properly?
Set the video card by referring to the
video card manual.
video card manual.
The screen suddenly
has become
has become
unbalanced.
Have you changed the
video card or the driver?
video card or the driver?
Adjust screen image position and
size using the OSD.
size using the OSD.
Have you adjusted the
resolution or frequency to
resolution or frequency to
the monitor?
Adjust the resolution and frequency
at the video card.
at the video card.
(Refer to the
Preset Timing Modes
).
The screen can be unbalanced due to the cycle of the video card signals.
Readjust Position by referring to the OSD.
The screen is out of
focus or OSD cannot
be adjusted.
focus or OSD cannot
be adjusted.
Have you adjusted the
resolution or frequency on
the monitor?
resolution or frequency on
the monitor?
Adjust the resolution and frequency
of the video card.
(Refer to the
of the video card.
(Refer to the
Preset Timing Modes
).
LED is blinking but no
images on the screen.
images on the screen.
Is the frequency properly
adjusted when checking
the Display Timing on the
menu?
adjusted when checking
the Display Timing on the
menu?
Adjust the frequency properly by
referring to the video card manual
and the
referring to the video card manual
and the
Preset Timing Modes
.
(The maximum frequency per
resolution may differ from product to
product.)
product.)
There are only 16
colors shown on the
screen.
The screen colors
have changed after
colors shown on the
screen.
The screen colors
have changed after
changing the video
card.
card.
Have the Windows colors
been set properly?
been set properly?
Windows ME/2000/XP:
Set the colors properly at the
Control Panel → Display →
Settings.
Set the colors properly at the
Control Panel → Display →
Settings.
Has the video card been
set properly?
Set the video card by referring to the
video card manual.
There is a message
that reads
"Unrecognized
that reads
"Unrecognized
monitor, Plug & Play
(VESA DDC) monitor
found".
(VESA DDC) monitor
found".
Have you installed the
monitor driver?
monitor driver?
Install the monitor driver according
to the
to the
Driver Installation Instructions
.
See the video card
manual to see if the Plug
& Play (VESA DDC)
manual to see if the Plug
& Play (VESA DDC)
function can be supported.
Install the monitor driver according
to the
to the
Driver Installation Instructions
.