Sceptre Technologies X22 Manuale Utente
Page18 SCEPTRE X22
If You Have VGA Connection on Your Video Card…
1.
Make sure the power of X22 LCD MONITOR is turned off.
2.
If you were previously using a CRT (bulky) monitor, please
hook up your old monitor first and make sure your refresh rate
is set to 60 Hz frequency before using the X22 LCD MONITOR.
You can find the refresh rate information and change it by
RIGHT CLICKING on the desktop with nothing selected. After
you have right clicked, select the PROPERTIES option. Click
on the SETTINGS tab. Click on the ADVANCED button. Click
on the MONITOR tab. In that tab, change the refresh rate to
60Hz and click on APPLY. After the refresh rate changed,
please shut down the computer and monitor.
hook up your old monitor first and make sure your refresh rate
is set to 60 Hz frequency before using the X22 LCD MONITOR.
You can find the refresh rate information and change it by
RIGHT CLICKING on the desktop with nothing selected. After
you have right clicked, select the PROPERTIES option. Click
on the SETTINGS tab. Click on the ADVANCED button. Click
on the MONITOR tab. In that tab, change the refresh rate to
60Hz and click on APPLY. After the refresh rate changed,
please shut down the computer and monitor.
3.
Obtain the VGA cable and connect to the VGA connection on
your PC. Connect the other end of the cable to your X22 LCD
MONITOR.
your PC. Connect the other end of the cable to your X22 LCD
MONITOR.
4.
Obtain the Audio In cable and connect the 3.5 mm Mini-jack
cable to the Audio In connection of the monitor. Connect the
other end of the 3.5 mm Mini-jack cable to your PC’s audio line
out connection.
cable to the Audio In connection of the monitor. Connect the
other end of the 3.5 mm Mini-jack cable to your PC’s audio line
out connection.
5.
Turn on the power of both the X22 LCD MONITOR and the PC.
Please Note :
•
The PC’s clearest picture is produced under 1680x1050
at 60Hz.
at 60Hz.