Sceptre Technologies X22 Manuale Utente

Page34                                  SCEPTRE X22  

 

Troubleshooting   

 

Possible solutions 

 
DISPLAY IS 
UNCLEAR AND 
UNSTABLE 

To stabilize and clarify your display, use 
the AUTO ADJUST function or change 
the resolution to the display’s optimal 
setting 1680 X 1050 at 60Hz, then AUTO 
ADJUST. 

 
THERE IS NO 
LCD DISPLAY 
or SCREEN 
SAYS NO 
VIDEO 

Make sure you switched to the correct 
source. Check both sources to see video 
is on the other source. Check your video 
cable. It might be corrupt. Swap out the 
video cable for another one to see if the 
monitor will work. Check your power plug.   
See if it is fully plugged in on both the 
monitor and the wall. 

 
MONITOR 
SAYS “SIGNAL 
OUT OF 
RANGE” 

If you have a CRT monitor, please 
connect the CRT monitor to the computer 
and change the refresh rate down to 
60Hz via your video card’s display 
settings menu. After the setting of 60Hz 
has been change you can then use the 
LCD on the computer. 

1.  To change the setting go to 

display settings by right clicking 
on your desktop with nothing 
selected.  Choose the 
PROPERTIES option. 

2.  Click on the SETTINGS tab, then 

click on the ADVANCED button. 

3.  Click on the MONITOR tab and 

change the refresh rate to 60Hz.

4.  Click on OK 2-3 times to finalize 

your change. 

 
If you do NOT have a CRT monitor or it’s 
already broken, please make sure both 
the X22 monitor and your computer is 
turned off.