Sceptre Technologies SCEPTRE X22 Manuale Utente
SCEPTRE X22 Page11
Important Safety Guidelines
This product is designed and manufactured to operate within defined design limits, and
misuse may result in electric shock or fire.
To prevent the product from being damaged, the following rules should be observed for
the installation, use and maintenance of the product. Read the following safety
instructions before operating the display. Keep these instructions in a safe place for future
reference.
To avoid the risk of electric shock or component damage, switch off the power
before connecting other components to the X22 LCD monitor.
Unplug the power cord before cleaning the X22 LCD monitor. A damp cloth is
sufficient for cleaning the X22 LCD monitor. Do not use a liquid or a spray
cleaner for cleaning the product. Do not use abrasive cleaners.
Always use the accessories recommended by the manufacturer to insure
compatibility.
When moving the X22 LCD monitor from an area of low temperature to an area of
high temperature, condensation may form on the housing.
Do not turn on the X22 LCD monitor immediately after, to avoid causing fire,
electric shock, or component damage.
Do not place the X22 LCD monitor on an unstable cart, stand, or table. If the X22
LCD monitor falls, it can injure a person and cause serious damage to the
appliance. Use only a cart or stand recommended by the manufacturer or sold with
the X22 LCD monitor.
Any heat source should maintain a distance of at least 5 feet away from the X22
LCD monitor, i.e. radiator, heater, oven, amplifier etc. Do not install the product
too close to anything that produces smoke or moisture. Operating the product close
to smoke or moisture may cause fire or electric shock.
Slots and openings in the back and bottom of the cabinet are provided for
ventilation. To ensure reliable operation of the X22 LCD monitor and to protect it
from overheating, be sure these openings are not blocked or covered. Do not place