Panasonic AJ-HRW10G Manuale Utente
12
For better performance (continued)
Recorded data
If P2 cards or HDDs are damaged, data on them will
be lost. Always keep an extra copy of important data
on separate media.
This unit supports mirror (RAID1) operation. Please
consider the worst situation of the operations.
Panasonic is not liable for data lost from P2 card or
HDD failure or other problems, or for other direct or
indirect loss.
be lost. Always keep an extra copy of important data
on separate media.
This unit supports mirror (RAID1) operation. Please
consider the worst situation of the operations.
Panasonic is not liable for data lost from P2 card or
HDD failure or other problems, or for other direct or
indirect loss.
Cleaning
Never clean the unit with solvents such as benzene,
thinner, or alcohol.
• Before cleaning, remove the battery or unplug the
thinner, or alcohol.
• Before cleaning, remove the battery or unplug the
unit from the external DC power supply.
• Cleaning the unit with solvents may damage the
external case or cause the paint to peel.
• Use a clean, soft dry cloth to wipe away dust or dirt.
If the unit becomes quite dirty, wipe it with a cloth
dampened in diluted neutral detergent after wringing
the cloth well. Use a dry cloth to wipe it dry.
dampened in diluted neutral detergent after wringing
the cloth well. Use a dry cloth to wipe it dry.
• If you use a chemically treated dust cloth, follow the
precautions for use.
Handling the touch panel
Do not press pointed objects, hard metallic objects, or
objects such as pencils or ballpoint pens against the
touch panel. This may damage the screen.
• If there is any oil or other substance adhering to the
objects such as pencils or ballpoint pens against the
touch panel. This may damage the screen.
• If there is any oil or other substance adhering to the
surface of the touch panel, it will not be possible to
conduct operations properly.
conduct operations properly.
• To clean the touch panel, wipe it with a soft cloth.
Do not use benzene, thinner, or similar substances.
Operation
1
As shown below, attach the surface fasteners
of the front cushion to the bottom of the front
panel.
panel.
2
Lift the front cushion and attach it to the top
of the front panel using the magnet.
Place the front cushion magnet
here to secure the cushion.
here to secure the cushion.
Before moving the unit, remove the HDDs.
(HDDs may be damaged if the unit is moved with these
drives left in place inside the unit.)
(HDDs may be damaged if the unit is moved with these
drives left in place inside the unit.)