Seagate ST34520W Manuale Utente

February 25, 1999

1

There is a new hard drive, SEAGATE ST34520W-4 - Com Code 407 942 135. The MLO's are sending this
drive as the replacement for the ST52160N.

This drive is a wide SCSI drive. To use it in a DEFAUD or an R1 you need the SCSI adapter for it

- Com Code 407 846 245.

The drive is used now in the AUDIX SLIM. To use it on a DEAUD with the adapter, the hard

drive needs to be spaced out from the drive bracket to clear the parts on the TN2169 behind the hard drive,
even then it will be a tight fit.

Use MOTOR START and PARITY and SCSI ID of 0 for DEFAUD. SCSI ID is needed for the R1

AUDIX, terminator disable is required.

-Joseph Berger

2/23/99

It is recommended that the Shielded SCSI Cable - Com Code 601 866 163 - be used with this disk drive
because it is shorter and more flexible.

Information from Wayne Motycka (2/24/99) and 

www.seagate.com

 :

Tape Drive

TN566B/567

ST 34520W

Power Supply

cc 407 942 135

A
d
a
p
t
e
r

C
o
n
n
e
c
t
o
r

S

C

S

I

C

a
b

l

e

SCSI Cable Adapter

HDD SCSI Cable Connector

 cc 407 846 245

Disk Drive Shielded SCSI Cable

ST 34520W

cc 601 866 163

Mounting Bracket

Anchor Plate

Power Supply

Circuit Board (TN566B/567

                                                                                                                       Circuit Board component
             Required air gap between Circuit Board components and SCSI
             Cable adapter and connector, this gap wil be extremely small, this picture shows a considerable gap
that overstates the space. The tech will need to assure that he can see light under the adapter.