Seagate ST973451FC Manuale Utente

10

Savvio 15K.1 FC Product Manual, Rev. B

Using the Mode Select command, the drive can change its capacity to something less than maximum. See the 
Mode Select (6) parameter list table in the Fibre Channel Interface Manual, part number 100293070. Refer to 
the Parameter list block descriptor number of blocks field. A value of zero in the number of blocks field indi-
cates that the drive shall not change the capacity it is currently formatted to have. A number in the number of 
blocks field that is less than the maximum number of LBAs changes the total drive capacity to the value in the 
block descriptor number of blocks field. A value greater than the maximum number of LBAs is rounded down to 
the maximum capacity.

OEM standard drives are shipped with the Savvio 15K.1 FC Installation Guide (part number 100384764) and 
the Safety and Regulatory Agency Specifications, part number 75789512 (unless otherwise specified).

You may order the following items which are incorporated at the manufacturing facility during production or 
packaged before shipping. Some of the options available are (not an exhaustive list of possible options):

• Other capacities can be ordered depending on sparing scheme and sector size requested.

• Single-unit shipping pack. The drive is normally shipped in bulk packaging to provide maximum protection 

against transit damage. Units shipped individually require additional protection as provided by the single unit 
shipping pack. Users planning single unit distribution should specify this option.

• The  Savvio 15K.1 FC Installation Guide, part number 100384764, is usually included with each standard 

OEM drive shipped, but extra copies may be ordered.

• The  Safety and Regulatory Agency Specifications, part number 75789512, is usually included with each 

standard OEM drive shipped, but extra copies may be ordered.