FieldServer FS-8700-86 Manuale Utente
FS-8700-86 Carrier DataPort
Page 7 of 32
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
4.3.
Client Side Node Descriptors
Section
Title
Nodes
Column
Title
Title
Nodes
Column
Title
Function
Legal Values
Node_Name
Provide name for node
Up
to
32
alphanumeric
characters
characters
Node_ID
These correspond to the ‘devices’ configured in the
DTPConfig. Thus the Node_ID is not the address of the final
CCN device.
The DataPort DTPConfig table maps a device number
(1...15) to a bus number (0-239). Use the Node_ID to tell the
driver which device to use.
DTPConfig. Thus the Node_ID is not the address of the final
CCN device.
The DataPort DTPConfig table maps a device number
(1...15) to a bus number (0-239). Use the Node_ID to tell the
driver which device to use.
1-15
Protocol
Specify protocol used
CarrierDP
Port
Specify which port the device is connected to the FieldServer P1-P8, R1-R2
3
Example
// Client Side Nodes
Nodes
Node_Name,
Node_ID,
Protocol ,
Port
FAN1 ,
1 ,
CarrierDP,
P8
3
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction
manual for details of the ports available on specific hardware.