FieldServer FS-8700-97 Manuale Utente

 
 
 

 1991 Tarob Court Milpitas, California 95035 USA  Web:www.fieldserver.com 

: (408) 262-2299   Fax: (408) 262-9042   Toll_Free: 888-509-1970   email: support@fieldserver.com 

The Lutron Machine driver allows the FieldServer to transfer data to and from devices over RS-
232 using Lutron eLumen protocol.  The FieldServer can emulate either a Server or Client, 
although the Lutron Machine driver is only available in Client configuration.  Any Server drivers 
are for FieldServer testing purposes only. 
 
Max Nodes Supported 

Client 1 

Only one Lutron Machine driver Client node is able to be 
connected to a Lutron eLumen panel. 

Server 1 

One BACNet IP node provides an upstream interface to the 
Lutron eLumen panel. 

 
The Lutron Grafik Machine Zone/Area Machine driver, hereafter simply referred to as the Lutron 
Machine driver, provides a BACNet IP interface to a Lutron eLumen panel.  The driver can be 
configured to represent zones or areas as used in the Lutron eLumen panel.  The FieldServer 
acts as both Client and Server to provide BACNet objects to an external BACNet Client.  In 
Server mode, the FieldServer collects data from the eLumen panel and holds the data ready for 
reads from an external BACNet Client.  In Client mode, the FieldServer executes pre-defined 
commands on the eLumen panel, for example, running scripts.