FieldServer FS-8700-103 Manuale Utente

 
 

 1991 Tarob Court Milpitas, California 95035 USA  Web:www.fieldserver.com 

: (408) 262-2299   Fax: (408) 262-9042   Toll_Free: 888-509-1970   email: support@fieldserver.com 

In this example the Map Descriptor is configured to read the incident report. The driver parses the report looking for malfunctions and 
reports that show a malfunction has been cleared. Other incidents / events are ignored except for events #19 and #37 which cause 
all malfunctions to be cleared. The Driver updates the array setting values to 1 (malfunction) or zero when a malfunction has been 
cleared. The position indicates the malfunction number. The driver has a list of malfunctions and index numbers stored internally. 
Refer to Appendix A.2 for this list. The list can be modified in the configuration CSV file. 

 

CAUTION: When the QIR report is polled it responds with the latest incidents only. This means that care should be taken to 
synchronize the FieldServer and the TGM. Read more about this in Appendix B.8 
 

//    Client Side Map Descriptors 
 

 

 

 

 

 

 

 

 

Map Descriptors 

 

 

 

 

 

 

 

 

Map_Descriptor_Name, 

Data_Array_Name,  Data_Array_Offset,  Function,  Node_Name  Address  Length  Scan_Interval  TGM_Funtion 

RD_QIR, 

DA_MALFUNC, 

0, 

RDBC, 

Node_A, 

0, 

100, 

2.0s 

QIR 

Driver sets the Data Array elements to 1 when there is 
malfunction and sets the value to zero when the malfunction is 
cleared. 
 
Position in the array indicates the malfunction number. 

Tells the driver 
to read the 
incident report

.