FieldServer FCI E3 Series Manuale Utente
FS-8700-132 Gamewell FCI-E3 Driver Manual
Page 8 of 20
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web: www.fieldserver.com
Tel: (408) 262 2299 Fax: (408) 262 2269 Toll Free: (888) 509 1970 email: support@fieldserver.com
4.3.
Client Side Node Descriptors
Section Title
Nodes
Column Title
Function
Legal Values
Node_Name
Provide name for Node
Up to 32 alphanumeric
characters
characters
Node_ID
Only
required
for
networked
configurations. Set the Node_ID of the
local panel to zero, and create one Node
Descriptor for each panel setting the
Node_ID to the panel number.
local panel to zero, and create one Node
Descriptor for each panel setting the
Node_ID to the panel number.
Whole numbers 0,1,2,3 …
Protocol
Specify protocol used
FCI_E3
FCI_Reset_Action_Option*
Only required for networked
configurations:
When not specified or set to
‘Reset_by_any_Node ‘ then the driver
will reset the data array points
associated with the given node
irrespective of the reset message’s
origin.
When set to ‘Reset_by_this_Node_Only’
then the driver only resets the data
associated with the given node if the
reset originated from the same node.
configurations:
When not specified or set to
‘Reset_by_any_Node ‘ then the driver
will reset the data array points
associated with the given node
irrespective of the reset message’s
origin.
When set to ‘Reset_by_this_Node_Only’
then the driver only resets the data
associated with the given node if the
reset originated from the same node.
Reset_by_any_Node,
Reset_by_this_Node_Only
Reset_by_this_Node_Only
Connection
Specify which port the device is
connected to the FieldServer
connected to the FieldServer
P1-P8
2
Example
// Client Side Nodes
Nodes
Node_Name,
Protocol,
Connection
Panel-01,
FCI_E3,
P8
4.4.
Client Side Map Descriptors
4.4.1.
FieldServer Related Map Descriptor Parameters
Column Title
Function
Legal Values
Map_Descriptor_Name
Name
of
this
Map
Descriptor
Up
to
32
alphanumeric
characters
Data_Array_Name
Name
of
Data
Array
where data is to be stored
in the FieldServer
in the FieldServer
One of the Data Array names
from “Data Array” section above
from “Data Array” section above
Data_Array_Offset
Starting location in Data
Array
Array
0 to maximum specified in
“Data Array” section above
“Data Array” section above
Function
Function of Client Map
Descriptor.
Descriptor.
Server, Passive_Client
2
Not all ports shown are necessarily supported by the hardware. Consult the appropriate Instruction
manual for details of the ports available on specific hardware.