FieldServer FS-8700-101 Manuale Utente
FS-8700-101_Setra Model 370 Digital Pressure Gage Manual
Page 22 of 23
FieldServer Technologies
1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldServer.com
Tel
: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldServer.com
Appendix C.2. Standard Driver Stats
Driver Statistics Recorded
Explanation
PLC Read Messages sent
Number of message sent to the Gage
PLC Write Messages sent
Should be zero
PLC Bytes sent
Total number of bytes sent by the Client side driver
PLC Message received
Total number of messages of all types received (ACK,
NAK, error response, normal response) on the Client side
driver.
NAK, error response, normal response) on the Client side
driver.
PLC Bytes received
Total number of bytes received by all message types on
the Client side driver.
the Client side driver.
Protocol
Protocol errors are incremented when the Client side
cannot correctly parse a response message from the
Gage. This includes responses that are formatted
differently from what the driver expects, or messages that
report the Gage is ‘unable’ or in setup mode.
cannot correctly parse a response message from the
Gage. This includes responses that are formatted
differently from what the driver expects, or messages that
report the Gage is ‘unable’ or in setup mode.
IC_Timeout
Incoming message buffer experiences an excessive
delay between incoming bytes
delay between incoming bytes
Timeout
Client side messages that were not responded to by a
Server. Possibly a communications error or a command
was made to a unit that does not exist.
Server. Possibly a communications error or a command
was made to a unit that does not exist.
Streaming
Message size was too large for the input buffer. This
should never occur.
should never occur.
Exception
Increments when a ‘status’ response contains a line with
insufficient information for storage but which may be a
heading.
insufficient information for storage but which may be a
heading.