FieldServer FS-8700-23 Manuale Utente
FS-8700-23 Cleaver Brooks Hawk Driver Manual
Page 11 of 13
FieldServer Technologies 1991 Tarob Court Milpitas, California 95035 USA Web:www.fieldserver.com
Tel: (408) 262-2299 Fax: (408) 262-9042 Toll_Free: 888-509-1970 email: support@fieldserver.com
Appendix A. Advanced Properties
Appendix A.1. Property Files
Each Controller interfacing to the FieldServer requires associated property files (denoted by
file extensions .bp1 and .bp2) to be loaded into the FieldServer. At present, the property
files listed in the device information table below are preloaded onto the FieldServer when
delivered. Other property files may be available upon request.
file extensions .bp1 and .bp2) to be loaded into the FieldServer. At present, the property
files listed in the device information table below are preloaded onto the FieldServer when
delivered. Other property files may be available upon request.
Appendix A.2. Configuration Files
Each Controller listed in the device information table below has an associated configuration
file as shown in the device information table. This configuration file can be used as a basis
for building a configuration for the FieldServer as it contains the mapping for the related
module.
file as shown in the device information table. This configuration file can be used as a basis
for building a configuration for the FieldServer as it contains the mapping for the related
module.
Note: SYSNet is the generic name for networks of the following modules. Controlbus is the
generic name for the networks in a NIM/CBLink configuration
generic name for the networks in a NIM/CBLink configuration