ViPowER VP-6228T Manuale Utente

b) Attach the IDE 40-pin data cable from the rear panel of the
bottom cover to the 40-pin connector on the back of the 5.25 “
device or Mobile Rack. To ensure pin-1 to pin-1 connection, orient
the cable so the colored stripe edge is closest to the power
connector.

c) Attach the 4-pin power cable from the rear panel of the bottom
cover to the 4-pin connector on the back of the 5.25” device or
Mobile Rack. The connector is “D” shaped to ensure proper
connection.

(Place one 5.25” IDE Device in the bottom enclosure cover)

IDE 40-pin Data Cable

on the rear panel

of the bottom cover

One 5.25” Device 

or

 one MobileRACK

4-pin Power
Connectors

4-pin Power Cable

on the rear panel

of the bottom cover

40-pin IDE Data

Connectors