Toshiba SD-R1512 Manuale Utente

5 

Audio Cable (optional) - If you have a sound card and 
speakers, and would like to play audio CDs on your 
computer, you will need to install a CD/DVD audio cable. 
Toshiba's Combo drives use a standard 4-pin audio 
cable that can be purchased from most local computer 
suppliers. The sound cable connects to your sound card 
at one end and the other end connects to the digital 
audio connector at the left rear of the Combo drive (see 
Combo drive Back Panel

 

photo for location). Refer to the 

instructions that came with your sound card for details 
on any sound-driver software required

.

 

 

 
After you have connected all the necessary cables, 
push the Combo drive completely into the computers 
drive slot. Mount drive per your computers 
instructions. The screw length should not exceed 
30.5mm (measured from outside surface of side or 
bottom of drive to tip of screw). Replace computer 
cover and all outer screws. 
 

 

 
Figure 6.Mounting Illustration

 

 

 

Software Driver - Toshiba's optical drives do not require any unique device drivers for Windows 
'95/'98/2000/Me/XP/NT. After installing your drive and re-booting, your system should recognize your 
drive. Windows '95/'98/2000/Me/XP/NT Operating Systems support all Toshiba optical drives natively If 
you prefer using DOS, download the DOS ATAPI driver from our web site.  

Other Software - Additional software is required to use the SD-R1512 CD-R/-RW and DVD functions. 
When you purchase the SD-R1512 as a kit, it will include the following software (Nero6): 

Nero6 OEM Suite Software – used to create CDs and view DVDs 

If you did not purchase the SD-R1512 as a kit, you will need to purchase third party software in order to 
view DVDs and create CD-R/-RW discs.