Toshiba W7 Manuale Utente
32
W7 ASD Installation and Operation Manual
System Configuration and Menu Options
Root Menus
The MON/PRG key is used to access the three root menus of the W7 ASD: the Frequency Command
screen, the Monitor screen, and the Program screen. From either mode, press the MON/PRG key to
loop through to the other modes (see
screen, the Monitor screen, and the Program screen. From either mode, press the MON/PRG key to
loop through to the other modes (see
In the event of a fault, the W7 ASD displays the fault screen until the source of the fault is removed and
the ASD is reset.
the ASD is reset.
Figure 23. Root Menu Mapping.
Frequency Command Screen
Frequency Setting
While operating in the Local mode (Local LED is illuminated on the EOI), the running frequency of the
motor may be set from the Frequency Command screen. Using the Rotary Encoder, enter the desired
Frequency Command value, press the Enter key and then press the Run key. The motor will run at the
Frequency Command speed and may be changed while running.
motor may be set from the Frequency Command screen. Using the Rotary Encoder, enter the desired
Frequency Command value, press the Enter key and then press the Run key. The motor will run at the
Frequency Command speed and may be changed while running.
Figure 24. Frequency Command Screen.
Commanded speed in the
Local Mode.
Running speed.
Operating Mode.
Discrete terminal
status — Reverse
video if active.
status — Reverse
video if active.
).
}
}
{
{
{
{
User-selectable unit of
measurement (see
).