Toshiba (T)XM6401B/F1 Manuale Utente
10
TOSHIBA XM-6401B/TXM6401F1 CD-ROM Drive
CD-ROM
DRIVE
Host Computer
I/F Card
Terminator
SCSI Cable
CD-ROM
DRIVE
Host Computer
I/F Card
Terminator
SCSI Cable
Interface
Connector
External Terminator
(see notes 1 & 3)
Interface Connector
CD-ROM
DRIVE
#2
CD-ROM
DRIVE
#N
(N < 7)
Install Terminator Jumper
only on the last drive of BUS
(see note 1)
Host Computer
I/F Card
Terminator
SCSI Cable
TXM6401F1/XM-6401B CONNECTION (ONE DRIVE)
TXM6401F1/XM-6401B DAISY-CHAIN CONNECTION (MULTIPLE DRIVES)
If connecting more
than three SCSI
devices, you need to
use a custom built
SCSI Interface Cable.
than three SCSI
devices, you need to
use a custom built
SCSI Interface Cable.
XM-6401B
INTERNAL DRIVE(S)
TXM6401F1
EXTERNAL DRIVE(S)
CD-ROM
DRIVE
#1
SCSI Interface Connector from
host computer
CD-ROM
DRIVE
#2
CD-ROM
DRIVE
#N
(N < 7)
Install External
Terminator on last drive on BUS
(see notes 1 & 3)
CD-ROM
DRIVE
#1
Notes:
1. Terminator jumper must be jumpered when CD-ROM is the last or only device on the SCSI BUS.
2. Terminator jumper should be removed when CD is in a "daisy-chain" and is NOT the last drive.
3. The TXM6401F1 uses an external terminator which must be attached to the last drive of a "daisy
chain". The external terminator is an optional item.
1. Terminator jumper must be jumpered when CD-ROM is the last or only device on the SCSI BUS.
2. Terminator jumper should be removed when CD is in a "daisy-chain" and is NOT the last drive.
3. The TXM6401F1 uses an external terminator which must be attached to the last drive of a "daisy
chain". The external terminator is an optional item.
Interface
Connector
X
M
6
4
0
1
4
0
1
B
T
X
X
M
6
4
0
1
4
0
1
F
1
(see note 2)
(see note 2)
(see note 2)
(see note 2)
(see note 1)
Daisy-Chaining - If the CD-ROM you are installing is one of two or
more SCSI devices you have connected to your system, you will need
to use a custom built SCSI interface cable. Remember that the termi-
nator jumper on the CD-ROM drive must have the jumper installed
when the drive is the last device in the chain.
more SCSI devices you have connected to your system, you will need
to use a custom built SCSI interface cable. Remember that the termi-
nator jumper on the CD-ROM drive must have the jumper installed
when the drive is the last device in the chain.