Toshiba M30X Manuale Utente

71

 

 

 

 

 

5.375 x 8.375 ver 2.3

To connect the device:

Connect one end of the video cable to the external video 
device.

Refer to the documentation provided with the device for the 
location of its video-in port.

Connect the other end of the video cable to the S-video 
port on the back of the computer.

Turn on the external video device.

Set the display mode by pressing 

Fn + F5

, or by setting the 

Display Properties settings. For more information, see 

.

TECHNICAL NOTE: If you are connecting to a television, you 
may need to change the display properties. Most televisions 
use or support an 800 x 600 standard resolution. 

Once you have connected an external display device, you can 
choose to use the internal display only, the external device 
only, or both simultaneously. The quickest way to change the 
display output settings is to use the display hot key (

Fn

 + 

F5

):

Press 

Fn

 and 

F5

 simultaneously.

While holding down 

Fn

, press 

F5

 repeatedly until the 

setting you want takes effect.

This hot key cycles through the settings in the following 
order:

❖

Built-in display only

❖

Built-in display and external monitor simultaneously

❖

External monitor only