Toshiba SD-R5372 Manuale Utente
15
DRIVE CONNECTORS –SD-R5372
Figure 1.SD-R5372 DVD Rewriteable Drive Rear Panel - Connectors
Power
Connector
Connector
Power is supplied to your DVD drive by the connection with your computer's +5V/+12V
power cable to the power socket at the back of drive. One side of the plug has
chamfered edges, so the power connector fits only one way.
power cable to the power socket at the back of drive. One side of the plug has
chamfered edges, so the power connector fits only one way.
CAUTION: Severe damage to the Drive circuits may occur if power cable is plugged in
upside-down with power ON.
upside-down with power ON.
Audio
Connectors
Connectors
Supplies Analog and Digital sound to your system
ATAPI
Connector
Connector
The SD-R5372 DVD drive is connected to your computer system through the ATAPI
connector
connector
Mode Select
Jumper
Jumper
The mode select jumpers are 6 straight angle pins located on the rear of the DVD drive.
By placing a jumper on the pins, you can select the following functions: CL (CSEL), SL
(Slave) or MA (Master). (see Setup or additional information).
By placing a jumper on the pins, you can select the following functions: CL (CSEL), SL
(Slave) or MA (Master). (see Setup or additional information).