Apple 13-0010--001 Manuale Utente

or, if you’re stuck with a Disk II, type:

     0

PROFILE will then ask for the seek speed of the 

drive:

    ENTER SEEK SPEED (0-2) :

     0) SLOW (DISK-II AND ELITE SERIES)

     1) MEDIUM (ELITE SERIES ONLY)

     2) FAST (ELITE TWO AND THREE)

The “?” in the example will be the “pre-loaded” 

answer (default) for the type of drive you spec-

ified on the previous menu. The default will be 

the maximum possible seek speed for the drive 

model specified. Now is not a good time to  

fiddle with seek speeds (you’ll just complicate 

matters), so just type:

     <RETURN>

to use the default.

PROFILE will then update the configuration table 

displayed at the top of the screen. It should  

now show the correct setting for your system 

drive. At the bottom of the table, you will  

again get:

    ENTER SELECTION (0-3)

     1) LOAD NEW DOS IMAGE FROM DISK

     2) CHANGE CURRENT DOS IMAGE SETTING

     3) SAVE CURRENT DOS IMAGE TO DISK

     0) TERMINATE PROFILE