Nikon HMSC7075 Manuale Utente

 

6 

Module will not register 
with the Wireless System 
Controller 

•  Ensure that the module's AC adapter is plugged in or has fresh batteries. 

•  Ensure that the Wireless System Controller is powered and online. 

•  Ensure that you are pressing the Discovery button. 

•  Reposition the module closer to the Wireless System Controller. 

•  Try another location. 

The Wireless System 
Controller does not 
recognize the module 
during discovery mode 

 

Make sure your Wireless System Controller indicates discovery mode and that the 
module is powered with fresh batteries. Press the Discovery button found inside of the 
battery compartment. If this continues to fail, you will need to try another location for 
the module. You may also try a hard reset by holding down the Discovery button while 
powering on the module. After resetting the module, please try to discover it again.

 

The status LED turns red 
when I touch the key to 
the Keypad port. 

The key was not accepted by the system. Try registering the key again. 

 

•  Device signal communication 
•  LED in module illuminates when activity occurs 
•  Home and Away LEDs light when either is activated 
• Weather 

resistant 

•  Hardware and base provided for either wall or table mounting 
•  AC power adapter included 

Communication frequency: 

418 MHz 

Typical range outdoors:  

200 feet (60 m) 

Typical range indoors:  

60 feet  (18 m) 

Dimensions: 

3.94"L × 2.32"W × 1.10"H (100mm × 59mm × 28mm) 

Operational temperature/ humidity:  

32° to 104° F with 10% to 80% humidity with all components operating within 
manufacturer thermal limits 

Storage temperature: 

-25° C to 75° C