Laser LS8000-3 Manuale Utente

LaserSpeed 8000-3 Instruction Handbook

 

 

 

Part No. 93463 / Drawing No. 0921-01561 

Page 126 of 221 

Revision A (Sep 2007) 

In this section, characters sent to or received from the LS8000-3 are indicated 
with a different font.  This is to differentiate between the description of the 
command or response and the command/response itself.  Any text that 
appears in mono-space font is text that is sent to or from the LS8000-3. 

 

Descriptive Text 

High Speed Pulse Setting 

Command/Response Text 

L1000000 

 

All commands sent to the LS8000-3 and all responses from the LS8000-3 end 
in a <CR>.  If commands are sent to the LS8000-3 ending in <CR><LF> 
(Carriage Return followed by a Linefeed), the LS8000-3 will not process the 
commands properly. All responses are be terminated with only a <CR>, not a 
<CR><LF>

. 

There are two different types of command syntaxes that the LS8000-3 uses.  
The first type is backward compatible with legacy LaserSpeed 4000/8000 
systems, and consists of one or two characters.  In general, these commands 
affect the LS8000-3's measurements or data processing.  The other type 
consists of longer commands, such as the *IPADDR command, which affect 
communications, or are informational commands.  These commands always 
start with an asterisk character (*).