Emerson NGA 2000 Manuale Utente

90003482(2) [NGA-e (MLT-Software 3.2.X)] 07/98

NGA 2000

• 

Go to the line you want with the 

↑↑

 -key or the 

↓↓

 -key. If there are more than eight

source modules available, you have to press the F5 key to go to another menu page.

• 

Select the tag of the module with the 

88 

 -key or the 

→

→

 -key:

The display will go back to the menu "DIO-Module Outputs" automatically.
The tag of the module selected will appear in the line "Signal comes from".

• 

Change to the line "Choose signal..." with the 

↓↓

 -key.

• 

Press the 

88 

 -key or the 

→

→

 -key to change to the submenu "Signals":

• 

Go to the line you want with the 

↓↓

 -key or the 

↑↑

 -key. With the F5 key you can go to

further menu pages containing also available signals:

„ 

Range overflow

„ 

Range underflow

„ 

Flow too low

„ 

Flow too high

„ 

SYS:Valve-1, -2, ... , -32

„ 

and further signals, if need be:
All signals of the control module and of the analyzer modules joint to the platform or
MLT analyzer (e.g. CLD, FID, MLT AM) are available in the menu "Signals".

• 

Select the signal with the 

88 

 -key or the 

→

→

 -key:

The display will go back to the menu "DIO-Module Outputs" automatically.
The signal selected will appear in the line "Signal name".

Measure

Back...

TAG

95.00 ppm

-- Signals --

Function control

Maintenance request

Failure

Cal. in progress

Zero in progress

Zero failed

Span failed

Span in progress