Multi-Tech Systems ISI4608-PCI Manuale Utente
43
Chapter 3—Software/Driver Installation
Printer base name selected: _________________
When you have specified the device base name and the printer base
name, press ENTER to continue.
4. The confirmation screen lists the values you have selected. The
following text appears on the screen (default values are shown):
You have chosen the following setup
The tty prefix is ttyl.
The printer prefix is prnl.
Number of Multi_View pseudo devices
[
user-specified number
].
If these values are correct, type
Y
and the installation process will
continue. If there is an error in any of the values displayed, type
N
and the first screen displays. Then re-enter the information for
each card.
When you accept the confirmation list (by typing
When you accept the confirmation list (by typing
Y
), a series of
messages displays while the driver is being installed and the kernel
rebuilt. After the terminals have been added to the Terminal
Control database, and when the display says
Press
<Enter> to continue
:, then press
ENTER
. When
Installation complete
displays, press
ENTER
again.
5. Select Host and press
ENTER
. Remove the diskette from the
drive.
6. Select Exit and press
ENTER
.
7. To reboot the system (required), enter the following commands:
Type
shutdown -g0-y
and press
ENTER
OR
Type
init 6
and press
ENTER
.
Driver installation for the ISIHP card now is complete.