Cisco Systems AIRCAP1552HAK9 Manuale Utente
1-24
Cisco Aironet 1550 Series Outdoor Mesh Access Point Hardware Installation Guide
OL-24247-01
Chapter 1 Overview
Hardware Features
GPS Option
A GPS module is required to accurately track the location of the AP and report it to the controller. to
provide location information for Cisco's AIR-CAP 1552I/C/CU/E/EU/H product line.
provide location information for Cisco's AIR-CAP 1552I/C/CU/E/EU/H product line.
For information on routing and securing the cable for the GPS antenna, refer to the 1550 Series GPS
Hardware Mounting Guide.
Hardware Mounting Guide.
Metal Enclosure
The access point uses a metal enclosure that can accommodate both indoor or outdoor operating
environments and an industrial temperature operating range of –40 to 131°F (–40 to 55°C). The access
point complies with NEMA 4 and IP67 requirements.
environments and an industrial temperature operating range of –40 to 131°F (–40 to 55°C). The access
point complies with NEMA 4 and IP67 requirements.
Optional Hardware
Depending on what you ordered, the following optional access point hardware may be part of your
shipment:
shipment:
•
External antennas, depending on which ones you purchased
•
Strand mount kit (AIR-ACCSMK1550=)
•
Pole mount kit (AIR-ACCPMK1550=)
•
Band installation tool for pole mount kit (AIR-BAND-INS-TL=)
•
AC power cord, 40 ft. (12.2 m) with North American plug (AIR-CORD-R3P-40NA=)
•
AC power cord, 40 ft. (12.2 m) with European unterminated end (AIR-CORD-R3P-40UE=)
•
Street light power tap (AIR-PWR-ST-LT-R3P=)
•
Power injector (AIR-PWRINJ1500-2=)
•
1000BASELX single-mode Rugged SFP (GLC-LX-SM-RGD=)
•
1000BASESX multimode Rugged SFP (GLC-SX-MM-RGD=)
•
EPON ONU Rugged SFP module
•
Battery, 6 amp hour (AIR-1520-BATT-6AH)
•
FIPS kit (AIRLAP-FIPSKIT=)
•
Optional directional-antenna mounting kit (AIR-ACCAMK-1)
•
Lightning Arrestor kit (CGR-LA-NM-NF)
•
Third-party lightning arrestors as required by local authorities