HP (Hewlett-Packard) 230859-004 Manuale Utente
Table 1: Diagnostic Station Kit Contents
continued
Item Description
4
DC power cord (for server blade)
1
5
DC power cord (for interconnect switch)
6
AC power cord
2
7
Network cable with RJ-45 connectors
Not shown
Documentation CD-ROM
Not shown
This installation guide
1
For information about connecting the diagnostic station to an interconnect
switch using this DC power cord, refer to the documentation that ships with
the interconnect switch.
the interconnect switch.
2
The AC power cords included with this kit each have a different outlet plug
configuration. Be sure to select the proper cord for the electrical service in
your facility.
your facility.
Warnings and Cautions
WARNING: To reduce the risk of shock or injury from high-current electrical
energy, do not remove the server blade access panel while the server blade is
connected to the diagnostic station.
energy, do not remove the server blade access panel while the server blade is
connected to the diagnostic station.
Powering the server blade with the access cover removed is a service
operation and must only be performed by trained service personnel.
operation and must only be performed by trained service personnel.
WARNING: To reduce the risk of shock or injury from high-current electrical
energy, do not disable the power cord grounding pin. The grounding pin is an
important safety feature.
energy, do not disable the power cord grounding pin. The grounding pin is an
important safety feature.
Plug the power cord into a grounded (earthed) electrical outlet that is easily
accessible at all times.
accessible at all times.
CAUTION: Remove all power from the diagnostic station before connecting to the
server blade. Disconnect all power cords to completely remove power from the
diagnostic station.
server blade. Disconnect all power cords to completely remove power from the
diagnostic station.
HP ProLiant BL p-Class System Diagnostic Station User Guide
7