Emerson NGA2000 Manuale Utente

NGA 2000

90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98

↓↓

Diagnostic menus

↓↓

Control module diagnostics

↓↓

In the menu "Control Unit Diagnostics" you can find software error messages of the
control module. If such messages are available, you can act in the following way:

1) Make a note of the error messages.

2) Reset the message:

• 

Press the ENTER key or the 

→

→

 -key in the line "Edit to reset".

• 

Set up "Reset" with the 

↑↑

 -key or the 

↓↓

 -key and confirm it with the ENTER key:

The error messages will disappear if the reason is not existing any longer.

• 

If the error messages keep displayed:

3) System reset:

• 

Change to the menu "System Reset" with the F3 key (REBOOT).

• 

Press the ENTER key or the 

→

→

6-14).

4) Check the error messages:

• 

Go again to the menu "Control Unit Diagnostics".

• 

If the error messages are still existing, contact your customer service, please.

• 

If the error messages are disappeared, you should set up the report status again:
Set up "Report" in the line "Edit to reset".

HOME

ESCAPE

REBOOT

INFO

CLD

95.0 ppm

Control Unit Diagnostics

Software error code (1 = no error):

1

And:
And:
And:
And:
And:

And:

Edit to reset:

Report

Last software error message

And: