Emerson NGA2000 Manuale Utente

NGA 2000

90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98

↓↓

Diagnostic menus

↓↓

Analyzer module diagnostics

↓↓

Start up analyzer

↓↓

In the menu "Analyzer start up" you will find the actual and target temperatures of the
converter and of the detector block. Besides, you can reboot the analyzer module and re-
initialize the EPROM in this menu:

1) Reboot:

• 

To restart the analyzer you have to press the F3 key.

• 

This reboot will start your analyzer in the same way as you do by switching on.

• 

If you flow the analyzer with zero gas during this time: The NO signal should be "0".

2) Re-initializing of the EPROM:

• 

If you press the F4 key you will update the EPROM data.

• 

Caution:
The analyzer will go back to the default values using this function !
After that you have to do a new start up, completely !

HOME

ESCAPE

REBOOT

INIT.

INFO

CLD

95.0 ppm

Analyzer start up

(Press INIT to re-initialize the EEPROM data)

Sensor temperature:

27.0 C

Detector block temperature:

50.3 C

Target temperature:

51.5 C

Converter temperature:

302.0 C

Target temperature:

300.0 C

Analyzer state:

STANDBY