Emerson NGA2000 Manuale Utente

NGA 2000

90003749(1) [NGA-e (Software CLD 2.3/MLT 3.1.X)] 04/98

↓↓

Auxiliary module controls

↓↓

Set-up SIO module

↓↓

From the menu "LOCAL SIO CONFIGURATION SECTIONS" you can change to
submenus to control and set up several output configurations of the auxiliary SIO module.
General Configuration of a SIO board (the whole specification is in another manual):

♦ 

Analog outputs: minimum 2, maximum 8

♦ 

Serial interface (RS 232 or RS 485) to connect the analyzer with a external computer

♦ 

Three relay outputs

If there is a SIO module installed in the platform or in the MLT analyzer, you have to put in
"Yes" in the line "Module installed", otherwise "No".

Set up parameters:

♦ 

Select the line of variables or any menu line with the 

↓↓

 -key or the 

↑↑

 -key.

♦ 

Select the variable or change to the submenu with the ENTER key or the 

→

→

 -key.

♦ 

Select the parameter with the 

↑↑

 -key or the 

↓↓

 -key.

♦ 

Confirm the new value with the ENTER key or cancel and go back to the last value with
the F2 key.

EXPERT

INFO

CLD

95.0 ppm

- LOCAL SIO CONFIGURATION SECTIONS -

Analog output setup...

Serial interface setup...

Configuration of Relay Outputs...

Module installed:

Yes