Emerson PMPPC7448 Manuale Utente

Setup:

PmPPC7448 Setup

2-10

Installing the Module

Most PPMC-compatible baseboards have two sets of four connectors (J11, J12, J13, J14 and
J21, J22, J23, J24), as defined by the PMC standard P1386.1. This allows the PmPPC7448 to
be installed in either PPMC slot.

Fig. 2-6

shows the location of these connectors and the

location of the PmPPC7448 modules on the baseboard.

Figure 2-6:

Module Location on Emerson CC1000-DM

Use the following procedure to attach the PmPPC7448 module to your baseboard in slot
PMC1 (see

Fig. 2-7

Remove the screws from the standoffs on the PPMC module.

Hold the module at an angle and gently slide the faceplate into the opening on the
baseboard.

PmPPC7448

(Bottomside)

PmPPC7448

(Bottomside)

J21

J22

J23

J24

J11

J12

J13

J14

PMC 1

PMC 2