Manualsbrain.com
  1. Manuali
  2. Marche
  3. Gigabyte
  4. GA-7VA
  5. Manuale Utente

Gigabyte GA-7VA Manuale Utente

Scarica
Pagina di 96
BIOS Setup
- 33 -
English
F
F
F
F
FIDE Primary Master, Slave / Secondary Master, Slave
The category identifies the types of hard disk from drive C to F that has been installed in the
computer. There are two types: auto type, and manual type. Manual type is user-definable; Auto
type which will automatically detect HDD type.
Note that the specifications of your drive must match with the drive table. The hard disk will not work
properly if you enter improper information for this category.
If you select User Type, related information will be asked to enter to the following items. Enter the
information directly from the keyboard and press <Enter>. Such information should be provided in
the documentation form your hard disk vendor or the system manufacturer.
8Capacity:
The hard disk size. The unit is Mega Bytes.
8Access Mode:
The options are: Auto / Large / LBA / Normal.
8Cylinder:
The cylinder number of hard disk.
8Head
The read / Write head number of hard disk.
8Precomp
The cyliner number at which the disk driver changes the write current.
8Landing Zone
The cylinder number that the disk driver heads(read/write) are seated when the
disk drive is parked.
8SECTORS
The sector number of each track define on the hard disk.
If a hard disk has not been installed select NONE and press <Enter>.
F
F
F
F
FDrive A / Drive B
The category identifies the types of floppy disk drive A or drive B that has been installed in the
computer.
8None
No floppy drive installed
8360K, 5.25 “.
5.25 inch PC-type standard drive; 360K byte capacity.
81.2M, 5.25”.
5.25 inch AT-type high-density drive; 1.2M byte capacity
(3.5 inch when 3 Mode is Enabled).
8720K, 3.5 “.
3.5 inch double-sided drive; 720K byte capacity
81.44M, 3.5 “.
3.5 inch double-sided drive; 1.44M byte capacity.
82.88M, 3.5 “.
3.5 inch double-sided drive; 2.88M byte capacity.
F
F
F
F
FFloppy 3 Mode Support (for Japan Area)
8Disabled
Normal Floppy Drive. (Default value)
8Drive A
Enabled 3 mode function of Drive A.
8Drive B
Enabled 3 mode function of Drive B.
8Both
Drive A & B are 3 mode Floppy Drives.