Fujitsu J2X1-7611-03ENZ0 Manuale Utente
c.
Importing the L-Server for which network information has been set
-
Import L-Servers created in the ROR console into the L-Platform
7.2.3.1 Network Information Settings for Converted L-Servers
Set the network information for the L-Servers converted in "
Execute the rcxadm lserver attach -define command to set network information.
The setting of network information via the command rcxadm lserver attach -define can only be performed on the L-Server before it is
imported into the L-Platform management function.
imported into the L-Platform management function.
Also, the rcxadm lserver attach -define command can only be executed if using Solaris container.
If adding multiple network interface cards (NICs), execute the command rcxadm lserver attach -define only the same number of times as
there are NICs being added.
there are NICs being added.
Refer to "3.6 rcxadm lserver" in the "Reference Guide (Command/XML) CE" for details.
7.2.3.2 Importing L-Servers
The Import L-Server command (cfmg_importlserver) can be used to import servers that have been deployed, or the VM guests that have
been imported using the ROR Console, to the L-Platform Management function.
been imported using the ROR Console, to the L-Platform Management function.
Refer to "12.4 cfmg_importlserver (Import L-Server)" in the "Reference Guide (Command/XML) CE" for details on this command.
Note
-
When an L-Server for infrastructure administrator is imported to an L-Platform, the operation privileges of the L-Server are transferred
to the tenant administrator or the tenant user.
to the tenant administrator or the tenant user.
When this L-Server is released from the L-Platform by the cfmg_deletelserver command, the L-Server is changed back to the one for
infrastructure administrator.
infrastructure administrator.
-
L-Servers without network interface cards (NICs) cannot be imported.
-
No initial password information will be set for an L-Server that has been imported without image information being specified. "initial
password is [.]" will be displayed on the initial password confirmation window of the system details window of the L-Platform
management window.
password is [.]" will be displayed on the initial password confirmation window of the system details window of the L-Platform
management window.
-
An L-Server that is under a tenant cannot be imported to a different tenant.
-
When importing an L-Server that is not under a tenant, switch the power off for the L-Server targeted for import.
-
Do not import physical L-Servers that have VM hosts installed. Refer to "Appendix D Installing VM Hosts on Physical L-Servers"
in the "Setup Guide CE" for information on installing VM hosts on a physical L-Server.
in the "Setup Guide CE" for information on installing VM hosts on a physical L-Server.
7.2.3.3 Releasing L-Servers
L-Servers that have been imported into the L-Platform management function can be released from the L-Platform by using the L-Server
release command (cfmg_deletelserver).
Refer to "12.2 cfmg_deletelserver (Release L-Server)" in the "Reference Guide (Command/XML) CE" for more information about the
command.
release command (cfmg_deletelserver).
Refer to "12.2 cfmg_deletelserver (Release L-Server)" in the "Reference Guide (Command/XML) CE" for more information about the
command.
7.2.4 Setting OS with Deployment on RHEL-KVM
Windows OS(excluding Microsoft(R) Windows Server(R) 2008 R2)
When the virtualization software is RHEL-KVM, the following OS configuration procedure is necessary on each deployed server with
Windows OS to enable the settings of the IP addresses, the default gateway, and the host name.
Windows OS to enable the settings of the IP addresses, the default gateway, and the host name.
- 16 -