Fujitsu P-SU4H30E Manuale Utente

1 Power indicator lamp

This lamp shows the state of the power supply.

Lit (red):

Stand-by

Lit (green):

Power ON

Lit (orange):

Power saving (DPMS: Power saving function) mode ON (See P. E-42.)

Flashing (red or green): Malfunction (Flashes differently depending on the type of malfunction. See P. E-50 for more information.)

2 Remote control signal receiver

Receives signals from the remote control.

3 POWER button

Turns the power “ON” and “OFF”.

* Even when the power is “OFF”, some parts are still powered.

4 Video3, S-video input terminal *

Connect this terminal to the S-video output terminal of your VCR, etc.

5 Video3, video input terminal *

Connect this terminal to the video output terminal of your VCR, etc.

6 Audio input terminals (L/R)

These are the audio input terminals for the Video3 and RGB3 terminals.

Input the audio for the video to be seen here.

7 RGB3 input terminal

Connect this terminal to your PC’s mD-sub output terminal.

* On selecting the video input format
(See “SETTING THE INPUT TERMINALS” on P. E-41.)

If the power indicator lamp flashes red or green, this signifies that the display has developed a problem.  When this happens, be sure to
remove the power plug from the receptacle and contact your dealer.  Leaving the display power ON can result in fire or electric shock.

 E-MHD00834(07_15)j.p65

03.10.24, 0:46 PM

Page 9

Adobe PageMaker 6.5J/PPC