Meridian America RGB-R-0 Manuale Utente

 

 

700 Elmont Rd, Elmont, NY 11003, Tel: 516-285-1000; Fax: 516-285-6300 

www.Meridian-tech.com

 

Page 8 

 

3/07 Rev 1.2 

 

 

Below is a listing of several problems that may arise during the installation & operation of the modules.  If you 
are having difficulty installing or operating the modules please refer to this list below.   
 
Problem:  

Check module orientation.  Meridian “Globe” must be oriented on the top left hand side of the 
module 

 

 

Make sure the card guides in the chassis are aligned with the extrusion on the module 

Problem: 

Action: 

Check power supply to ensure that it is plugged in and turned on.  If flashing continues, move 
module to another chassis or location in the same chassis, if available. 

Problem: 

No Video 

1 - Check the modem locations to ensure that the RGB-T module is connected to the video 
source (computer, camera, etc) while the receiver module (RGB-R) is connected to the video 
output device (monitor, etc.) 

2 – Check to ensure that the modules are in the proper mode of operation (RGB or DVI) – 
onboard switch #1 (see section 3.4) 

 
If the problem still persists after reviewing the above items, please contact Meridian technical support (516-285-
1000).

  

 

 

The table below lists the presently-supported video resolutions and refresh rates.  Meridian continues to expand 
the supported variations and will update this list as they become available. 
 
If you have any questions about other resolution/refresh rates, please call our technical service personnel.