Omega 1002 Manuale Utente

cards. 

Step 7: If a card’s D/O=D/I Æ this is the physical card number, remember this number. 
Step 8: Repeat the previous two steps to find the physical card number of all boards. 

 
Step 1: Power-off the PC. 
Step 2: Install one OME-PCI-1002 card with a 20-pin flat cable between CON1 & CON2. 
Step 3: Power-on the PC then run DEMO2.EXE. 
Step 4: The DO and DI are displayed as TEST OK or TEST ERROR. 
 
 
 
 
 

 
•  A/D Test for OME-PCI-1002 card 
Step 1: Power-off the PC. 
Step 2: Install one OME-PCI-1002 card. 
Step 3: Power-on PC, run DEMO6.EXE 
Step 4: Apply +10V to channel 0. 
Step 5: Apply +0V to channel 1. 
Step 6: Apply -10V to channel 2. 
Step 7: Run DEMO6.EXE. 
Step 8: Check channel 0 = fff or ffe? 
Step 9: Check channel 1 = 800 or 801? 
Step 10: Check channel 2 = 000 or 001?