NEC PD750004 Manuale Utente

µPD750008 USER'S MANUAL

The µPD750008 has one timer/event counter channel (channel 0) and one timer counter channel (channel

1).  Figures 5-28 and 5-29 show the configuration of these channels.

In this section, the timer/event counter and timer counters are referred to as "timer/event counters."  When

you read this section for description of channel 1, take "timer/event counter" as "timer counter."

The timer/event counter has the following functions.

(a) Programmable interval timer operation

(b) Square wave output of any frequency to the PTOn pin.

(c) Event counter operation (Channel 0 only)

(d) Divides the frequency of signal input via the TI0 pin to 1-Nth of the original signal and outputs the

divided frequency to the PTO0 pin (frequency divider operation) (Channel 0 only).

(e) Supplies the serial shift clock to the serial interface circuit (Channel 0 only).

(f) Calls the counting status.

Figures 5-28 and 5-29 shows the configuration of the timer/event counter.