Omega OMB-DAQBOARD-3000 Manuale Utente
DaqBoard Installation Guide
This guide tells how to complete the following steps for a successful installation.
Step 1 – Install Software …… page 2
Step 2 – Install Boards in Available PCI Bus-Slots …… page 3
Step 3 – Configure Boards ….. page 5
Step 4 – Test Hardware ….. page 6
Reference Note:
After you have completed the installation you should refer to the electronic documents that
were automatically installed onto your hard drive as a part of product support. The default
location is in the Programs group, which can be accessed from the Windows Desktop.
After you have completed the installation you should refer to the electronic documents that
were automatically installed onto your hard drive as a part of product support. The default
location is in the Programs group, which can be accessed from the Windows Desktop.
You should keep your DaqBoard’s serial number and your DaqView authorization code (if applicable)
with this document. Space is provided below for recording up to 4 board numbers and their PCI bus-slot
locations. Board serial numbers stand out clearly as they are printed on white labels. The serial number
locations are located as follows:
with this document. Space is provided below for recording up to 4 board numbers and their PCI bus-slot
locations. Board serial numbers stand out clearly as they are printed on white labels. The serial number
locations are located as follows:
o
Boards with P4 (100-pin) connectors: The s/n is located on the P4 connector.
o
Boards with P5 (68-pin) connectors: The s/n is located on the board.
In addition to serial numbers, the boards have device identification labels which read, for example,
“DaqBoard/2001,” “DaqBoard/3005” etc. The name labels are convenient for
users of more than one board type.
“DaqBoard/2001,” “DaqBoard/3005” etc. The name labels are convenient for
users of more than one board type.
Board Type
(e.g., 2000,
2001, 3005, etc.)
2001, 3005, etc.)
*
Serial Number
PCI Bus-Slot Location
Board 1
Board 2
Board 3
Board 4
The host PC can support up to four Boards.
CAUTION
Take ESD precautions (packaging, proper handling, grounded wrist strap, etc.)
Use care to avoid touching board surfaces and onboard components. Only handle boards
by their edges (or ORBs, if applicable). Ensure boards do not come into contact with
foreign elements such as oils, water, and industrial particulate.
Use care to avoid touching board surfaces and onboard components. Only handle boards
by their edges (or ORBs, if applicable). Ensure boards do not come into contact with
foreign elements such as oils, water, and industrial particulate.
Reference Notes:
(1) Each DaqBoard plugs into a PCI bus-slot. Consult your PC owner’s manual if needed.
(2) DaqBoard/2000 Series users should read about the DBK cards and modules applicable to their
acquisition system. Specific DBK information can be found in the world wide web at
http://www.daqboard.com; and in the DBK Option Cards and Modules User’s Manual (p/n 457-0905).
After the install you can navigate to the DBK manual and other relevant electronic documents from your
desktop as follows: Start
acquisition system. Specific DBK information can be found in the world wide web at
http://www.daqboard.com; and in the DBK Option Cards and Modules User’s Manual (p/n 457-0905).
After the install you can navigate to the DBK manual and other relevant electronic documents from your
desktop as follows: Start
⇒ Programs ⇒ Omega DaqX Software ⇒ DaqBoard 2000 Series Users
Note: DaqBoard/3000 Series boards do not support DBK options.
IG-2 DaqBoard Installation Guide
918494
1033-0940, rev 8.0