Soyo SY-K7VTA Pro Manuale Utente

SY-K7VTA PRO 

  Data rates up to 1Mbps 
  Perpendicular recording driver support 
  Two FDDs with drive swap support 
  Plug and play with 48 base IO address, 12 IRQ and 4 DMA 

options 

The Setup program provides configuration option for the I/O controller. 

The motherboard has two 9-pin D-Sub serial port connectors located on 
the back panel. The NS16C5450-compatible UARTs support data transfers 
at speeds up to 115.2 Kbits/sec with BIOS support. 

The connector for the multimode bi-directional parallel port is a 25-pin 
D-Sub connector located on the back panel of the motherboard. In the 
Setup program, there are four options for parallel port operation: 

  Compatible (standard mode) 
  Bi-directional (PS/2 compatible) 
  Bi-directional EPP. A driver from the peripheral manufacturer is 

required for operation. 

  Bi-directional high-speed ECP 

The I/O controller is software compatible with the 82077 diskette drive 
controller and supports both PC-AT and PS/2 modes. In the Setup program, 
the diskette drive interface can be configured for the following diskette 
drive capacities and sizes. 

  360 KB, 5.25-inch 
  1.2 MB, 5.25-inch 
  720 KB, 3.5-inch 
  1.2 MB. 3.5-inch (driver required) 
  1.25-1.44 MB, 3.5-inch 
  2.88 MB, 3.5-inch