Transcend Information TS-ABX31 Manuale Utente

•     

Select the correct specifications for the diskette drive(s) installed in the computer.

- None : No diskette drive installed

- 360K, 5.25 in : 5-1/4 inch PC-type standard drive; 360 kilobyte capacity

- 1.2M, 5.25 in : 5-1/4 inch AT-type high-density drive; 1.2 megabyte capacity

- 720K, 3.5 in : 3-1/2 inch double-sided drive; 720 kilobyte capacity

- 1.44M, 3.5 in : 3-1/2 inch double-sided drive; 1.44 megabyte capacity

- 2.88M, 3.5 in : 3-1/2 inch double-sided drive; 2.88 megabyte capacity

•     

Select the type of primary video subsystem in your computer. The BIOS usually detects the

correct video type automatically. The BIOS supports a secondary video subsystem, but do

not select it in this Setup.

- EGA/VGA : Enhanced Graphics Adapter/Video Graphics Array. For EGA, VGA, SEGA,

  SVGA or PGA monitor adapters.

- CGA 40 : Color Graphics Adapter, powers up in 40-column mode

- CGA 80 : Color Graphics Adapter, powers up in 80-column mode

- MONO : Monochrome adapter, includes high resolution monochrome adapters

•     

During the Power On Self Test (POST), the computer stops if the BIOS detects a hardware

error. You can set the BIOS to ignore certain errors during POST and continue the boot-up

process. The followings are the selections.

- No Errors : POST does not stop for any error.

- All Errors : If the BIOS detects any non-fatal error, POST stops and prompts you to take

corrective action.

- All, But Keyboard : If the BIOS detects any non-fatal error except keyboard, POST stops

and prompts you to take corrective action.

- All, But Diskette : If the BIOS detects any non-fatal error except floppy disk drive, POST

stops and prompts you to take corrective action.

- All, But Disk / Key : If the BIOS detects any non-fatal error except floppy disk drive or

keyboard, POST stops and prompts you to take corrective action.