Transcend Information TS-ABX31 Manuale Utente

•     

Enabling this feature reserves memory address space from 15MB to 16MB to ISA expan-

sion cards that specifically require this setting. This makes the memory from 15MB and up

unavailable to the system. Expansion cards can only access memory up to 16MB. The de-

fault is “Disabled”.

•     

ISA access speed is lower than PCI access speed. While power on, the ISA interface would

release master bus control. The master bus control will go back ISA until other device ac-

cesses data.

•     

PCI access speed is faster than ISA. So PCI would release master bus to ISA interface for

accessing data. Then the master bus control would go back to PCI again.

•     

Select the size of the Accelerated Graphics Port (AGP) aperture.The aperture is a portion of

the PCI memory address range dedicated to graphics memory address space. Host cycles

that hit the aperture range are forwarded to the AGP without any translation. For more infor-

mation, please refer to www.agpforrum.org for AGP information.

•     

This function allows you to set FSB frequency of the CPU and the speed of PCI bus. When

JP2 is set to 66MHz, then default FSB is 66MHz, and there are several options under

100MHz available. When JP2 is set to 100MHz, then default FSB is 100MHz, and there

are also several options above 100MHz available for you to choose.

•     

Enable this item to protect the CPU from overheating.

•     

This item will show the fan speed of CPU by RPM.

•     

This item will show the fan speed of power by RPM.

•     

This item will show the fan speed of case by RPM.