Soyo SY-7ISA+ Motherboard Manuale Utente
BIOS Setup Utility
SY-7ISA+
70
The following tables describe each field in the INTEGRATED
PERIPHERALS Menu and provide instructions on how to configure the
IDE controls, FDC controls, and the onboard serial and parallel ports.
3-5.1 IDE Device Controls
IDE Controls
Setting
Description
Note
Disabled
Turn off the on-board
IDE
IDE
On-Chip PCI IDE
Ø Primary
Ø Secondary
Ø Secondary
Enabled
Use the on-board IDE
Default
mode 0-4
0 is the slowest speed
4 is the fastest speed
4 is the fastest speed
IDE
Ø Primary Master PIO
Ø Primary Slave PIO
Ø Secondary Master PIO
Ø Primary Slave PIO
Ø Secondary Master PIO
Ø
Secondary Slave PIO
Auto
For better performance
and stability, we suggest
you use the Auto setting
to set the HDD control
timing.
and stability, we suggest
you use the Auto setting
to set the HDD control
timing.
Default
Disabled
IDE
Ø Primary Master UDMA
Ø Primary Slave UDMA
Ø Secondary Master UDMA
Ø Secondary Slave UDMA
Ø Primary Slave UDMA
Ø Secondary Master UDMA
Ø Secondary Slave UDMA
Auto
Select Auto to enable
Ultra DMA Mode
support.
Ultra DMA Mode
support.
Default
3-5.2 Keyboard Controls
Keyboard Controls Setting
Description
Note
Disabled
USB Controller
Enabled Select Enabled if your system
contains a Universal Serial Bus
(USB) controller and you have
USB peripherals.
(USB) controller and you have
USB peripherals.
Default
Disabled Turn off the on-board IDE
Default
USB Keyboard
Support
Support
Enabled Use a USB keyboard
PCI Slot
Default
Init Display First
AGP
Choose which card – AGP
Display card or PCI VGA card –
to initialize first.
Display card or PCI VGA card –
to initialize first.