IBM 71Y Manuale Utente
Symptom-to-FRU index
165
SCSI error codes
7xxx (host/local PCI bus interface error)
1.
Install download jumpers, flash latest level
BIOS and firmware for adapter. Remove
jumpers.
BIOS and firmware for adapter. Remove
jumpers.
2.
ServeRAID 3HB Adapter/Controller
8xxx (SCSI I/O port error)
1.
Install download jumpers, flash latest level
BIOS and firmware for adapter. Remove
jumpers.
BIOS and firmware for adapter. Remove
jumpers.
2.
ServeRAID 3HB Adapter/Controller
9xxx (SCSI termination error)
1.
2.
SCSI cable
3.
SCSI backplane
4.
Hard drive
5.
ServeRAID 3HB Adapter/Controller
Axxx (SCSI I/O port error)
1.
Bxxx (SCSI bus interface error)
1.
2.
SCSI cable
3.
SCSI backplane
4.
Hard drive
5.
ServeRAID 3HB Adapter/Controller
Error Code
FRU/Action
All SCSI Errors
One or more of the following
might be causing the problem:
•
A failing SCSI device (adapter, drive,
controller)
controller)
•
An improper SCSI configuration or SCSI
termination jumper setting
termination jumper setting
•
Duplicate SCSI IDs in the same SCSI chain
•
A missing or improperly installed SCSI
terminator
terminator
•
A defective SCSI terminator
•
An improperly installed cable
•
A defective cable
1.
External SCSI devices must be
powered-on before you power-on the
server.
powered-on before you power-on the
server.
2.
The cables for all external SCSI devices
are connected correctly.
are connected correctly.
3.
If you have attached an external SCSI
device to the server, make sure the
external SCSI termination is set to
automatic.
device to the server, make sure the
external SCSI termination is set to
automatic.
4.
The last device in each SCSI chain is
terminated correctly.
terminated correctly.
5.
The SCSI devices are configured
correctly.
correctly.
Error Code/Symptom
Action